Back to Top

What is new

Cup Pulls

FOR USE WITH WOOD OR GLASS DOORS
Flush Pull
GR.6009
The recessed grip is supplied with a threaded pin for glass thicknesses of 5/16"- 1/2". Longer grub screws are readily available for thicker doors.
GR.6009
Finishes
Flush Pull
GR.5948
The standard design consists of a 1/2" thick exterior half and a 3/8" slim interior half. In this way, the door can be installed close to the wall, and depending on the base board or door frame a reduced wall spacing is possible. You can alternatively choose the option with both sides 1/2"-thick.
GR.5948
Finishes
Aspero Flush Pull
GR.5913
Recessed flush pull Aspero Round shell grip with a knurled edge. Aspero, a design line that reflects the character of industrial style.
GR.5913
Finishes
Edge Pull
GR.7545
This G-shaped flush pull is designed for use with glass pocket doors. An adhesive is required for installation
GR.7545
Finishes
Flush Pull
GR.5905
This classic MWE flush pull is suitable, on the one hand, for 5/16"- 1/2" thick glass doors, and on the other can be installed on 9/16"- 3 1/8" wooden doors.
GR.5905
Finishes
Cup Pull
GR.3226
With a depth of ~5/16", the flush pull GR.3226 is particularly convenient to use. Its special feature is the way it can be installed flush on one side using flat-headed countersunk glass connectors. This flush pull appeals to the hand and eye.
GR.3226
Finishes
Flush Pull
GR.6600
for wood or glass doors
GR.6600
Finishes
Flush Pull
GR.6090
This flush pull has a diameter of 2 3/8". It is ideal for wooden doors where it can be stuck on, or even glued flush into place. It can also be glued to glass.
GR.6090
Finishes
Cup Pull
GR.5908
This flush pull is suitable for glass door leaves with a thickness of 5/16"- 1/2". The front is reminiscent of the flush pull GR.5905, but the rear is slimmer and therefore ideal for very small wall spacings. The flush pull stands proud at this point by only 1/8".
GR.5908
Finishes
Flush Pull
GR.6605
for wood or glass doors
GR.6605
Finishes
Flush Pull (open)
GR.5941
The flush pull GR.5941 is rather more a ring pull than a flush pull. It elegantly edges the 1 15/16" glass drill hole designed as an opening and links with the door leaf to form a pleasing functional and visual whole.
GR.5941
Finishes
Flush Pull
GR.8030
The slim construction design has been developed to suit the ProTec, Klassik and Supra sliding-door systems.
GR.8030
Finishes

Pull Bars (Ladder Pull)

CUSTOM LENGTHS AVAILABLE
Steel
TG.0001
Solid raw steel material. Designed to match the "STEEL" sliding door systems. The finish is intentionally rustic and may show shading and inclusions.
TG.0001
Handle Strip
GL.35
The use of 1/16" thick Tesnit underlays enables cleaning with a thin cloth between the glass and the handle bar. The shape of the grip surface is precisely adapted to the shape of the human finger
GL.35
Klassik
TG.1101
Our bestseller! Classic round profile handle made of stainless steel tubing with elegant cover caps with a shadow gap.
TG.1101
Protec
TG.1016
Made of solid material. Designed to match the "ProTec" sliding door system.
TG.1016
Unix
TG.1007
The mitered round sections of Unix are welded very finely and precisely. After hand polishing, the finished handle looks as if it were made from one piece.
TG.1007
Solaris
TG.1527
Square profile made of solid stainless steel
TG.1527
Linea
TG.1524
Elegant combination of wood and stainless steel. No visible screw joints!
TG.1524
Luna
TG.1511.30
Elegant combination of wood and stainless steel. No visible screw joints!
TG.1511.30
Planus
TG.1038
Made of solid stainless steel. No visible screws!
TG.1038
Akzent
TG.1039
Made of solid stainless steel.
TG.1039
Akzent R
TG.1143
Flat profile pull made of solid stainless steel. The modern touch of slightly rounded corners
TG.1143
Spider
TG.1513
Made of solid material. Designed to match the "Spider" sliding door system.
TG.1513
Balea
TG.1140
Premium edition Made of solid material. The Balea handle is partly polished for an intriguing contrast!
TG.1140
Azure
TG.1137
Premium edition Made of solid material. The Azure door handle is full of impressive details and partly polished!. It was developed in conjunction with the Akzent swing door system
TG.1137
Stilett
TG.1150.S
Lockable pull handle Classic with a profile cylinder lock & key. The handle locks into the supplied dustproof floor receptacle with spring technology
TG.1150.S
Contorno
TG.1528
Made from a semicircular stainless steel tube. Due to the appearance of a flat profile, the handle meets modern design requirements
TG.1528
Antheo
TG.1531
Antibacterial Brass Meets Stainless Steel. Brass center piece is flush with the stainless steel handle ends.
TG.1531
Verus
TG.1532
Antibacterial Brass Meets Stainless Steel. Solid Brass conical shape in the middle of the handle.
TG.1532
Vitus
TG.1530
Antibacterial Brass Meets Stainless Steel. The brass center piece, which is larger in diameter, offers a stronger appearance and is therefore particularly suitable for larger doors. This handle model are made of solid material. The brass grip is also solid and screwed together with a fine thread.
TG.1530
Nilus
TG.1533
Black aluminum center pieces. The middle grip area is made of aluminum with a knurled surface.
TG.1533
MOVE [Pull Bar]
DD.0330
DD.0330
Akzent Q
TG.1102
TG.1102
Ecco
TG.1015
Classic round profile handle made of stainless steel tube (1 3/16" diameter) with elegant cover caps with a shadow gap
TG.1015
Stilett
TG.1150.S/AK
Lockable pull handle Akzent with a profile cylinder lock & key. The handle locks into the supplied dustproof floor receptacle with spring technology
TG.1150.S/AK
Stilett
TG.1170.PZ/XL
Lockable door pull with a double profile cylinder & key. The door pull locks by turning two turns; No stretching, no stooping down. Just locking at reachable height. Perfect lifelong functioning and a locking mechanism that locks into ceiling and floor. The handle locks into the supplied dustproof floor & ceiling receptacle with spring technology
TG.1170.PZ/XL
Stilett
TG.1170.PZ
Lockable door pull with a double profile cylinder & key. The door pull locks by turning two turns. The handle locks into the supplied dustproof floor receptacle with spring technology
TG.1170.PZ
Stilett
TG.1170.PZ/WC
Lockable door pull with a profile cylinder & key/thumbturn. The door pull locks by turning two turns. The handle locks into the supplied dustproof floor receptacle with spring technology
TG.1170.PZ/WC
Metro
TG.1100
Classic round profile handle made of stainless steel tube with welded and finely ground ends.
TG.1100
Aspero
TG.1113
URBAN INDUSTRIAL STYLE. The middle grip area is made with a knurled surface.
TG.1113
Stilett
TG.1150
The Classic bar handle is a lockable door handle with pull and push buttons. The handle locks into the supplied dustproof floor receptacle with spring technology
TG.1150

Door Knobs

FOR USE WITH WOOD OR GLASS DOORS
Door Knobs Aspero
SA.3313
Pommel with a knurled edge. Aspero, a design line that reflects the character of industrial style.
SA.3313
Finishes
Door Knobs
SA.3300
This cylindrical door knob can be used in many ways yet never loses its stylish effect. Simple 1 9/16" aesthetics diameter. The rounded milled recess on the underside makes this clear-cut shape ergonomic.
SA.3300
Finishes
Door Knobs
SA.3310
Smaller version to the SA.3300 with 1" aesthetics diameter. The rounded milled recess on the underside makes this clear-cut shape ergonomic.
SA.3310
Finishes
Door Knobs
SA.3315.25
This door knob comes into play when the furnishing style requires a clean line and the design is continued through angular shapes. with 1" x 1" aesthetics diameter. The rounded milled recess on the underside makes this clear-cut shape ergonomic.
SA.3315.25
Finishes
Door Knobs
DD.0310
Lg. Hinged Door Pull
DD.0310
Finishes
Door Knobs
DD.0320
Sm. Hinged Door Pull
DD.0320
Finishes

Lever Handles

FOR USE WITH WOOD OR GLASS DOORS
Aspero
TD.1413
With the ASPERO series lever handles, we deliver a completely timeless handle design with eye-catching knurling on the grip
TD.1413
Finishes
Cabin Lock
KT.8850 with KT.8860 receiver
KT.8850 with KT.8860 receiver
Finishes
Cabin Lock
KT.8850
Privacy lock [Indicator on reverse]
KT.8850
Finishes
Lever Handles
Akzent EVO [Privacy] - [Lever TD.1401]
Available as standard latch or magnetic
Akzent EVO [Privacy] - [Lever TD.1401]
Finishes
Lever Handles
Akzent EVO [Passage] with Reciever - [Lever TD.1401]
Available as standard latch or magnetic
Akzent EVO [Passage] with Reciever - [Lever TD.1401]
Finishes
Lever Handles
Akzent Evo [Passage] - [Lever TD.1401]
Avalable as a standard latch or magnetic
Akzent Evo [Passage] - [Lever TD.1401]
Finishes

Finishes: Color Options

Finishes shown are for general viewing purposes only. Due to various screen resolutions the finish shown may appear differently on each device. The final provided finish may vary from what is digitally shown. This difference does not constitute a claim of defect.

Stainless Steel

Brushed
600 grit finish
MWE standard
Polished
Mirrored finish
Copper
PVD
Matte
Polished
Brass
PVD
Matte
Polished
Carbon Black
PVD
Matte
Polished
Titanium
PVD
Matte
Polished
Bronze
PVD
Matte
Polished
Platinum
PVD
Matte
Polished
RAL Color
Powder Coated
Glossy (MWE standard)
Matte
Textured
Metallic
24K Gold
Plated
Burnished
Rust
Painted
Partial polished

Request Pricing

Door Handle Hardware (#10)
Finish
 
Function & Style
 
Your contact details
downloadcross